The Spirabel Vendanges SF hose is specifically designed for viticulture and food liquids. It is sold in 25 m and 50 m coils and is available in various diameters.
Data sheet




Minimum of order : 20 € (VAT ex.)
Free delivery in France from 250€ (VAT ex.)
Refine your selection to display the available references.
| Reference ▲ ▼ | Hose Diameter ▲ ▼ | Hose length ▲ ▼ | Couleur tuyau ▲ ▼ | Price ▲ ▼ | Qty |
|---|
The Spirabel® Vendanges SF is a clear flexible PVC hose designed for suction and discharge of grape must, wine and other liquid food products. An impact-resistant rigid PVC helix reinforces the hose wall. The hose remains flexible at low temperatures, making it easier to handle in wineries and cellars.
The smooth bore limits pressure loss and reduces areas where liquid can collect, making the hose easier to rinse. Sizes up to 63 mm internal diameter have a smooth exterior that makes clamps easier to tighten and reduces friction against the floor. The hose is bisphenol A (BPA) free and contains less than 0.1% phthalates.
The Spirabel® Vendanges SF meets the requirements of Regulation (EU) No 10/2011 for the food contact uses covered. It can convey products such as wine, fruit juice and milk. It can also carry alcoholic beverages up to 50% ABV at a maximum temperature of 40 °C, subject to the applicable contact conditions.
Use the RaccordsPro hose food compatibility tool to check suitability for the food product, temperature and contact time.
Before circulating a cleaning or disinfecting solution, check the hose’s resistance to the product at the intended concentration and operating temperature. Use the RaccordsPro hose chemical compatibility tool.
Size the system using the maximum working pressure for the chosen bore and check the allowable pressure at your actual operating temperature. Allow at least the bend radius shown in the table.
| Internal Ø (mm) | Coil length (m) | Max. working pressure at 23 °C (bar) | Non-burst pressure limit at 23 °C (bar) | Bend radius (mm) |
|---|---|---|---|---|
| 40 | 25 or 50 | 7 | 21 | 144 |
| 50 | 25 or 50 | 7 | 21 | 175 |
| 60 | 25 | 6 | 18 | 210 |
| 63 | 25 | 6 | 18 | 220 |
| 70 | 25 | 6 | 18 | 245 |
| 80 | 25 | 5 | 15 | 280 |
| 100 | 25 | 5 | 15 | 350 |
| 120 | 25 | 5 | 15 | 420 |
Depending on the installation, use Guillemin, Storz, Camlock or lever-lock hose-tail couplings with suitable flat-band hose clamps. Check that the hose tail is free of burrs before fitting it to protect the bore from damage.
The hose can lengthen under pressure, especially above 40 °C. Allow for this when choosing the hose length and routing. The internal diameter and batch number are marked on the hose.
Data sheet
Specific References
Symmetrical fittings
CAMLOCK COUPLING
BSP Fittings
Discharge systems
Professional hoses
Symmetrical fittings
CAMLOCK COUPLING
BSP Fittings
Discharge systems
Professional hoses
Please sign in first.
Sign in