×
Click for more products.
No products were found.
Click for more products.
No products were found.

Locking plug for symmetrical fitting - Aluminium

Plugs with lock for symmetric fitting - Aluminium, available from DN 20 mm to DN 150 mm.

Read moreShow less

Data sheet

Nominal diameter
20 mm to 150 mm
Material
Aluminium
Lock type
With lock
Gasket
NBR
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/AXP-FT-bouchon-RS.pdf
More information Express quote

Get your express quote for this product

Need a large quantity? Get a negotiated price on this combination within 24 hours. Free and no obligation.


Requested product :
Locking plug for symmetrical fitting - Aluminium (id : 626)


€9.83 (tax excl.) / unit
(€11.80 TTC)

Minimum of order : 20 € (VAT ex.)

Free delivery in France from 250€ (VAT ex.)

Configure your product

DN

Order now and receive it...

Colissimo Points de retrait et bureaux de poste between Tuesday 24 November and Wednesday 25 November  with  Colissimo Points de retrait et bureaux de poste

Colissimo Expert (Domicile contre signature) between Tuesday 24 November and Wednesday 25 November  with  Colissimo Expert (Domicile contre signature)

Transporteur DPD, TNT ou DB Schenker between Tuesday 24 November and Wednesday 25 November  with  Transporteur DPD, TNT ou DB Schenker

Choose your reference

Refine your selection to display the available references.

Reference DN A (mm) B (mm) C (mm) D (mm) Price Qty

Description

Aluminium Guillemin caps with locking ring and chain for symmetrical couplings

This range of Guillemin caps for symmetrical couplings closes off a hose, valve or pipe fitted with a compatible Guillemin half coupling of the same nominal diameter (DN). The aluminium cap attaches to the half coupling using its locking ring. The retaining chain keeps the cap close to the connection point when removed.

  • Aluminium body — Lightweight for easy handling during repeated opening and closing.
  • Built-in lock — The locking ring secures the cap to a compatible Guillemin half coupling of the same DN.
  • Retaining chain — Attach it near the coupling to keep the cap from getting lost during transfer.
  • White food-grade NBR seal — Seals the cap against the half coupling. For food applications, check that all components exposed to the product are suitable for food contact.

Applications for aluminium Guillemin caps with locking rings

  • Protecting hoses between uses — Cap the half coupling to help keep out dust and dirt during storage and handling.
  • Closing a tank or valve outlet — Cap the Guillemin connection after isolating the line and releasing any residual pressure.
  • Filling and draining stations — Close the connection after transfer and use the chain to keep the cap nearby while the station is in use.

Choosing the Guillemin cap size

Choose the same Guillemin DN as the half coupling you want to close. For example, a DN 20 cap fits a DN 20 Guillemin half coupling. If the half coupling is mounted on a hose or a threaded outlet, check the DN at the Guillemin end where the cap will fit.

Available sizes — DN 20, 25, 32, 40, 50, 65, 80, 100, 125 and 150.

Dimensions and technical drawing for Guillemin caps

In “Choose your reference”, select the DN you need. The table lists dimensions A, B, C and D in millimetres where these are available for the selected part.

Click “Show technical drawing” above the table to see where each dimension is measured on the cap.

Reference standards for the aluminium Guillemin range

The aluminium Guillemin range is documented under EN 14420-8 and the historical reference NF E 29-572. Check the allowable operating conditions for the selected cap and the complete assembly.

Fitting and removing the locking cap

  1. Isolate and depressurise the line. Check that the seal and the mating face of the half coupling are clean and in good condition.
  2. Place the cap against the half coupling of the same DN. Turn the locking ring and check that it is fully engaged.
  3. Before removing the cap, verify that the line is isolated and depressurised, then release the locking ring.

Checking the chemical compatibility of aluminium and NBR

Check that the aluminium and NBR seal are compatible with any product that may come into contact with the cap, taking into account its concentration and temperature. Use our chemical compatibility tool for materials.

Complementary products for your Guillemin connection

Technical data sheet for Guillemin caps

Download the Guillemin cap data sheet with available dimensions (PDF)

Read moreShow less
Product Details
010407

Data sheet

Nominal diameter
20 mm to 150 mm
Material
Aluminium
Lock type
With lock
Gasket
NBR
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/AXP-FT-bouchon-RS.pdf
Online tools

Customers who bought this product also bought:

Menu

Menu