×
Click for more products.
No products were found.
Click for more products.
No products were found.

Plug without lock for symmetric fitting - Aluminium

Plugs without lock for symmetric fitting - Aluminium, available from DN 40 mm to DN 100 mm.

Read moreShow less

Data sheet

Nominal diameter
40 mm to 100 mm
Material
Aluminium
Lock type
Without lock
Gasket
NBR
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/AXP-FT-bouchon-RS.pdf
More information Express quote

Get your express quote for this product

Need a large quantity? Get a negotiated price on this combination within 24 hours. Free and no obligation.


Requested product :
Plug without lock for symmetric fitting - Aluminium (id : 627)


€12.65 (tax excl.) / unit
(€15.18 TTC)

Minimum of order : 20 € (VAT ex.)

Free delivery in France from 250€ (VAT ex.)

Configure your product

DN

Order now and receive it...

Colissimo Points de retrait et bureaux de poste between Tuesday 24 November and Wednesday 25 November  with  Colissimo Points de retrait et bureaux de poste

Colissimo Expert (Domicile contre signature) between Tuesday 24 November and Wednesday 25 November  with  Colissimo Expert (Domicile contre signature)

Transporteur DPD, TNT ou DB Schenker between Tuesday 24 November and Wednesday 25 November  with  Transporteur DPD, TNT ou DB Schenker

Choose your reference

Refine your selection to display the available references.

Reference DN A (mm) B (mm) C (mm) Price Qty

Description

Padlockable aluminium Guillemin caps without a locking ring, with retaining chain

This range of Guillemin caps without a locking ring closes off a hose, valve or pipe. The flat aluminium cap fits a Guillemin half coupling of the same nominal diameter (DN) fitted with a locking ring. The ring on the half coupling holds the cap in place, and the retaining chain keeps it within reach when removed.

  • Aluminium body — Lightweight and easy to handle during repeated opening and closing.
  • Without a built-in lock — The locking ring on the Guillemin half coupling secures the cap.
  • Padlockable cap — The hole takes a compatible padlock or security seal once the cap is fitted.
  • Retaining chain — Attach it near the coupling to keep the cap from getting lost.
  • White food-grade NBR seal — Seals the cap against the half coupling. For food applications, check that all components exposed to the product are suitable for food contact.

Applications for aluminium Guillemin caps without a locking ring

  • Irrigation — Cap a Guillemin outlet after shutting down and depressurising the system.
  • Protecting hoses between uses — Cap the half coupling to help keep out dust and dirt.
  • Filling and draining stations — Close the connection after transfer and fit a padlock or security seal if required by your procedure.

Choosing the Guillemin cap size

Check the Guillemin DN of the half coupling you want to close and make sure it has a locking ring. For example, a DN 40 cap fits a DN 40 Guillemin half coupling with a locking ring. If the half coupling is fitted to a threaded valve or pipe, check the DN at the Guillemin end where the cap will fit.

Available sizes — DN 40, 50, 65, 80 and 100.

Dimensions and technical drawing for Guillemin caps

In “Choose your reference”, select the DN you need. The table lists dimensions A, B and C in millimetres where they are available for the selected part.

Click “Show technical drawing” above the table to see where each dimension is measured on the cap.

Reference standard for Guillemin caps without a locking ring

NF E 29-572 is the reference standard for this range of Guillemin symmetrical fittings without a movable locking ring. Check the allowable operating conditions for the selected cap and the complete assembly.

Fitting and removing the cap

  1. Isolate and depressurise the line. Check that the seal and mating faces are clean and in good condition.
  2. Place the cap against the half coupling of the same DN, then turn the half coupling’s locking ring until it is fully engaged.
  3. Before removing the cap, verify that the line is isolated and depressurised. Remove any padlock or security seal, then release the half coupling’s locking ring.

Checking the chemical compatibility of aluminium and the NBR seal

Check that the aluminium and NBR seal are compatible with any product that may come into contact with the cap, taking into account its concentration and temperature. Use our chemical compatibility tool for materials.

Guillemin half couplings to use with the cap

Technical data sheet for Guillemin caps

Download the Guillemin cap data sheet with available dimensions (PDF)

Read moreShow less
Product Details
010509

Data sheet

Nominal diameter
40 mm to 100 mm
Material
Aluminium
Lock type
Without lock
Gasket
NBR
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/AXP-FT-bouchon-RS.pdf
Online tools

Customers who bought this product also bought:

Menu

Menu