×
Click for more products.
No products were found.
Click for more products.
No products were found.

Plug without lock for symmetric fitting - Stainless steel

Plugs without lock for symmetric fitting - Stainless steel, available from DN 50 mm to DN 100 mm.

Read moreShow less

Data sheet

Nominal diameter
50 mm to 100 mm
Material
Stainless steel
Lock type
Without lock
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/AXP-FT-bouchon-RS.pdf
More information Express quote

Get your express quote for this product

Need a large quantity? Get a negotiated price on this combination within 24 hours. Free and no obligation.


Requested product :
Plug without lock for symmetric fitting - Stainless steel (id : 628)


€44.37 (tax excl.) / unit
(€53.24 TTC)

Minimum of order : 20 € (VAT ex.)

Free delivery in France from 250€ (VAT ex.)

Configure your product

DN

Order now and receive it...

Colissimo Points de retrait et bureaux de poste between Tuesday 24 November and Wednesday 25 November  with  Colissimo Points de retrait et bureaux de poste

Colissimo Expert (Domicile contre signature) between Tuesday 24 November and Wednesday 25 November  with  Colissimo Expert (Domicile contre signature)

Transporteur DPD, TNT ou DB Schenker between Tuesday 24 November and Wednesday 25 November  with  Transporteur DPD, TNT ou DB Schenker

Choose your reference

Refine your selection to display the available references.

Reference DN A (mm) B (mm) C (mm) Price Qty

Description

Padlockable 316 stainless steel Guillemin caps for symmetrical couplings, with retaining chain and no locking ring

This range of Guillemin caps without a locking ring closes off a hose, valve or pipe. The 316 stainless steel cap fits a Guillemin half coupling of the same nominal diameter (DN) fitted with a locking ring. The ring on the half coupling holds the cap in place.

  • 316 stainless steel body — Suitable for transfer installations where corrosion resistance is required.
  • Without a built-in lock — The locking ring on the Guillemin half coupling secures the cap.
  • Padlockable cap — The hole takes a compatible padlock or security seal once the cap is fitted.
  • Retaining chain — Attach it near the coupling to keep the cap within reach when removed.

Applications for stainless steel Guillemin caps without a locking ring

  • Protecting hoses between uses — Cap the half coupling to help keep out dust and dirt.
  • Closing a tank or valve outlet — Cap the Guillemin connection after isolating and depressurising the line.
  • Filling and draining stations — Close the connection after transfer and fit a padlock or security seal if required by your procedure.

Choosing the Guillemin cap size

Check the Guillemin DN of the half coupling you want to close and make sure it has a locking ring. For example, a DN 50 cap fits a DN 50 Guillemin half coupling with a locking ring. If the half coupling is fitted to a threaded valve or pipe, check the DN at the Guillemin end where the cap will fit.

Available sizes — DN 50, 80 and 100.

Dimensions and technical drawing for Guillemin caps

In “Choose your reference”, select the DN you need. The table lists dimensions A, B and C in millimetres where they are available for the selected part.

Click “Show technical drawing” above the table to see where each dimension is measured on the cap. The PDF also lists the retaining chain length for each DN.

Reference standard for Guillemin caps without a locking ring

NF E 29-572 is the reference standard for this range of Guillemin symmetrical fittings without a movable locking ring. Check the allowable operating conditions for the selected cap and the complete assembly.

Fitting and removing the cap

  1. Isolate and depressurise the line. Check that the seal and mating faces are clean and in good condition.
  2. Place the cap against the half coupling of the same DN, then turn the half coupling’s locking ring until it is fully engaged. Fit a padlock or security seal if required.
  3. Before removing the cap, verify that the line is isolated and depressurised. Remove any padlock or security seal, then release the half coupling’s locking ring.

Checking the chemical compatibility of 316 stainless steel and the seal

Check that the 316 stainless steel and seal material are compatible with any product that may come into contact with the cap, taking into account its concentration and temperature. Use our chemical compatibility tool for materials.

Guillemin half couplings to use with the cap

Technical data sheet for Guillemin caps

Download the Guillemin cap data sheet with available dimensions (PDF)

Read moreShow less
Product Details
010502

Data sheet

Nominal diameter
50 mm to 100 mm
Material
Stainless steel
Lock type
Without lock
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/AXP-FT-bouchon-RS.pdf
Online tools

Customers who bought this product also bought:

Menu

Menu