Camlock couplers with a hose tail (Type C) in polypropylene reinforced with 30% glass fibre
The Camlock cam-and-groove system makes it quick and easy to form a leak-tight connection between two hoses or between a hose and fixed equipment.
This range of Camlock couplers with a hose tail (Type C) is made from polypropylene (PP) reinforced with 30% glass fibre. The female Camlock end accepts a compatible male Camlock adaptor. At the other end, the barbed hose tail fits directly into the hose and is secured with a suitable hose clamp. The nominal Camlock size and hose tail size can differ depending on the model.
- Body — Black polypropylene with 30% glass fibre for high rigidity and good hardness.
- Camlock connection — Female connection with two cam levers, available in nominal sizes from 3/4″ to 4″.
- Hose tail — Available in sizes from 1/2″ to 4″. Choose the size to match the nominal inside diameter of the hose.
- Seal — EPDM gasket on the Camlock side.
Benefits of Camlock couplers with a hose tail
- Secure connection — The two cams hold the male adaptor in place when both levers are fully closed.
- Quick connection — Once the coupler is fitted to the hose, connect it by closing the two cam levers.
- Lightweight construction — The polypropylene body makes the hose easier to handle when connecting and disconnecting it.
- Easy maintenance — The EPDM gasket is accessible for inspection and replacement.
- Wide choice of sizes — Different combinations of Camlock and hose tail sizes allow you to match the coupler to your hose.
- Fits existing equipment — Connect the coupler to a pump, valve or tank fitted with a compatible male Camlock adaptor.
- Chemical resistance — Polypropylene is compatible with a wide range of liquids. Check that the EPDM gasket is also suitable for the liquid and operating conditions.
- Food-contact suitability to be confirmed — Check that the polypropylene body and gasket of the selected part are suitable for the food involved, the temperature and the contact time.
- Polypropylene reinforced with 30% glass fibre — The glass fibre gives the coupler body high rigidity and good hardness.
Applications of polypropylene Camlock couplers with a hose tail (Type C)
- Joining two hoses — Fit a Type C coupler to one hose and a Type E male Camlock adaptor with a hose tail to the other. Use the same nominal Camlock size on both sides.
- Connecting a hose to fixed equipment — Connect a transfer hose to a pump, valve, tank or pipework fitted with a compatible male Camlock adaptor.
- Filling and draining — Connect a removable hose to transfer process water or other compatible liquids in industrial or agricultural installations.
Choosing the Camlock and hose tail sizes
Use the “Choose your reference” section to select the two sizes for your assembly.
- DN — The nominal size of the Camlock connection. Match it to the size of the male Camlock adaptor.
- Ø output — The nominal hose tail size. Match it to the nominal inside diameter of your hose. When choosing a clamp, use the outside diameter of the hose once it is fitted over the tail.
Example — Part 040130 combines a 3/4″ Camlock connection with a 1/2″ hose tail. It connects a 3/4″ male Camlock adaptor to a hose with a nominal inside diameter of 1/2″.
To check the overall dimensions of the coupler and the hose tail, click “Show technical drawing” above the product table. Dimensions shown in the table are in millimetres.
Fitting the hose to the tail and closing the cam levers
- Push the hose onto the barbed tail and secure it with a hose clamp suitable for the hose and operating conditions.
- Open both cam levers, insert the compatible male Camlock adaptor and fully close both levers.
- Check the assembly for leaks when putting it into service. Depressurise the system before opening the cam levers.
The maximum working pressure of the assembly is limited by the lowest-rated component under the operating conditions. Check the ratings of the coupler, adaptor, hose and clamp.
Checking chemical compatibility
Use the chemical compatibility tool for materials to check the polypropylene body and EPDM gasket against the liquid, its concentration and its temperature. To check the hose, use the hose chemical compatibility tool.
Checking food-contact suitability
For food transfer, check the suitability of every component that comes into contact with the product. Use the hose food compatibility tool to help select a suitable hose.
Completing your Camlock connection
- Male Camlock adaptors — Choose a matching nominal Camlock size and a connection suited to your equipment or second hose.
- Hoses — Choose a hose suited to the liquid, working pressure and hose tail size.
- Hose clamps — Choose a clamp sized to the outside diameter of the hose once it is fitted over the tail.
- Replacement gaskets for polypropylene Camlock fittings — Choose a gasket that matches the Camlock size and is suitable for the liquid being transferred.
Technical data sheet for Camlock couplers with a hose tail
Download the range data sheet (PDF, in French)
Read moreShow less