The Spirabel MDSE hose is a cold-flexible hose for industrial applications under severe operating conditions, including at low temperatures. It is sold in 20-meter, 30-meter and 50-meter coils and is available in diameters ranging from 40 mm to 151 mm.
Data sheet



Minimum of order : 20 € (VAT ex.)
Free delivery in France from 250€ (VAT ex.)
Refine your selection to display the available references.
| Reference ▲ ▼ | Hose Diameter ▲ ▼ | Hose length ▲ ▼ | Couleur tuyau ▲ ▼ | Price ▲ ▼ | Qty |
|---|
The Spirabel® MDSE is an opaque grey hose designed for heavy-duty industrial applications, including suction and discharge during drainage and wastewater handling. A white, impact-resistant rigid PVC helix embedded in the flexible PVC wall reinforces the hose and helps it resist crushing.
Lightweight and easy to handle, the MDSE stays flexible in cold conditions down to −25 °C. The smooth bore limits pressure loss and reduces areas where residues can collect. Its phthalate content is below 0.1%.
Before pumping effluent, check the hose’s resistance to the substances present at their expected concentrations and operating temperature. Use the RaccordsPro hose chemical compatibility tool.
For oils and hydrocarbons, select the Spirabel® MDSO hose and check compatibility with the product being transferred.
Size the system using the maximum working pressure or vacuum rating for the selected bore. The table gives values at 23 °C. Check the allowable value at the actual operating temperature and allow at least the stated bend radius when routing the hose.
| Internal Ø (mm) | Coil length (m) | Max. working pressure at 23 °C (bar) | Non-burst pressure limit at 23 °C (bar) | Max. vacuum at 23 °C (mbar) | Bend radius (mm) |
|---|---|---|---|---|---|
| 19 | 30 | 5 | 15 | 950 | Not specified |
| 25 | 30 | 5 | 15 | 950 | 88 |
| 32 | 30 | 5 | 15 | 950 | 112 |
| 38 | 30 | 5 | 15 | 950 | 133 |
| 40 | 30 | 5 | 15 | 990 | 140 |
| 51 | 30 | 5 | 15 | 990 | 179 |
| 60 | 30 | 4 | 12 | 990 | 211 |
| 63 | 30 | 4 | 12 | 990 | 221 |
| 76 | 30 | 4 | 12 | 990 | 266 |
| 80 | 50 | 4 | 12 | 990 | 280 |
| 102 | 30 | 3 | 9 | 990 | 357 |
| 120 | 30 | 2 | 6 | 990 | 540 |
| 127 | 20 | 2 | 6 | 990 | 572 |
| 151 | 20 | 2 | 6 | 990 | 680 |
Depending on the installation, use Guillemin, Storz, Camlock or lever-lock hose-tail couplings with suitable single-wire hose clamps. Check that the hose tail is free of burrs before fitting it to protect the bore. Avoid crimped fittings and band clamps, as they can cause leaks or crush and break the helix.
The hose can lengthen under pressure, particularly above 40 °C. Allow for this when choosing the hose length and routing. The internal diameter and batch number are marked on the hose.
Data sheet
Specific References
| Nominal diameter | 15 mm to 150 mm |
| Material | Aluminium |
| Adapter output | Hose connector |
| Lock type | With lock |
| Nominal diameter | 25 mm à 150 mm |
| Material | Aluminium |
| Lock type | With lock |
Symmetrical fittings
CAMLOCK COUPLING
BSP Fittings
Discharge systems
Professional hoses
Symmetrical fittings
CAMLOCK COUPLING
BSP Fittings
Discharge systems
Professional hoses
Please sign in first.
Sign in