| Material | PP |
| Adapter output | Hose connector |
The Windflex 1500 PU hose is a polyurethane hose reinforced with a steel spiral. It is recommended for heavy-duty applications. It is supplied in 10-metre coils and available in diameters ranging from 40 mm to 100 mm.
Data sheet


Minimum of order : 20 € (VAT ex.)
Free delivery in France from 250€ (VAT ex.)
Refine your selection to display the available references.
| Reference ▲ ▼ | Hose Diameter ▲ ▼ | Hose length ▲ ▼ | Couleur tuyau ▲ ▼ | Price ▲ ▼ | Qty |
|---|
Windflex® 1500 PU is translucent flexible ducting designed for the suction and transfer of abrasive materials. Its 1.5 mm ester-based polyurethane wall is reinforced with a sheathed steel helix. This construction combines abrasion resistance, flexibility and mechanical strength.
The very smooth bore helps materials move through the ducting. The polyurethane is rated UL 94 V-2.
The ducting has a resistivity below 106 Ω·m, measured according to NF EN ISO 8031. Tricoflex lists the ducting as suitable for sites subject to ATEX requirements. Check that the complete assembly, including fittings, meets the requirements of the intended zone.
If the water, powders or granules contain substances that may attack polyurethane, check the ducting’s resistance at the intended concentration and operating temperature. Use the RaccordsPro hose chemical compatibility tool.
For suction lines, check the allowable vacuum for the selected bore and operating temperature. Allow at least the bend radius shown in the table when routing the ducting.
| Inside Ø (mm) | Max. vacuum at 23 °C (mbar) | Bend radius (mm) |
|---|---|---|
| 40 | 700 | 60 |
| 45 | 600 | 68 |
| 50 | 600 | 75 |
| 60 | 550 | 90 |
| 70* | 500 | 105 |
| 76* | 500 | 114 |
| 80* | 450 | 120 |
| 90* | 450 | 135 |
| 100 | 400 | 150 |
| 120* | 300 | 180 |
| 127* | 300 | 188 |
| 140* | 250 | 210 |
| 150* | 200 | 225 |
| 160* | 200 | 240 |
| 180* | 150 | 270 |
| 200* | 150 | 300 |
* Size not stocked by the manufacturer.
Secure the ducting to a suitable spigot using a medium-duty hose clamp or a T-bolt clamp. Check that the spigot is free of burrs to protect the inner wall. The markings show the inside diameter and batch number and indicate that the ducting is made in France.
Data sheet
Specific References
| Material | PP |
| Adapter output | Hose connector |
| Material | PP |
| Adapter output | Hose connector |
| Material | PP |
| Adapter output | Male |
Symmetrical fittings
CAMLOCK COUPLING
BSP Fittings
Discharge systems
Professional hoses
Symmetrical fittings
CAMLOCK COUPLING
BSP Fittings
Discharge systems
Professional hoses
Please sign in first.
Sign in