×
Click for more products.
No products were found.
Click for more products.
No products were found.

Gaine WINDFLEX 806 M EL

The WINDFLEX 806 M EL hose is recommended for applications in hazardous areas and explosive atmospheres. It is supplied in 10-metre coils and available in diameters ranging from 51 mm to 160 mm.

Read moreShow less

Data sheet

Hose's name
Gaine Windflex 806 M EL
Use
Suction & discharge (air, gas, dust and shavings)
Type of hose
Thin-walled and spiral-reinforced sheath
Application
Ducting
Conditioning
10 m pipe coil
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/gaine-windflex-806-m-el-en.pdf
Internal diameter
51 mm, 80 mm, 160 mm
Coil
10 m
More information Express quote

Get your express quote for this product

Need a large quantity? Get a negotiated price on this combination within 24 hours. Free and no obligation.


Requested product :
Gaine WINDFLEX 806 M EL (id : 885)


Phthalates free
+90°C to -40°C
Electricity (antistatic)
€58.75 (tax excl.) / mètre
(€70.50 TTC/m)

Minimum of order : 20 € (VAT ex.)

Free delivery in France from 250€ (VAT ex.)

Configure your product

Diameter int. (or int./ext.)
Length
Couleur
  • Black
This hose is sold in coils of 10 m at a price of (Vat ex.)

Order now and receive it...

Transporteur DPD, TNT ou DB Schenker between Tuesday 24 November and Wednesday 25 November  with  Transporteur DPD, TNT ou DB Schenker

Choose your reference

Refine your selection to display the available references.

Reference Hose Diameter Hose length Couleur tuyau Price Qty

Description

Tricoflex Windflex® 806 M EL conductive ducting for powder and granule extraction

Windflex® 806 M EL is flexible ducting designed for the extraction and transfer of powders, granules and abrasive particles, as well as the extraction of oil fumes. Its black ester-based polyurethane wall is electrically conductive throughout the material and reinforced with a coated spring-steel helix.

The ducting resists abrasion and vacuum. Its smooth bore helps material flow and reduces pressure loss. The polyurethane is UL 94 V-2 rated and the phthalate content is below 0.1%.

Windflex® 806 M EL ducting applications

  • Powder extraction and transfer – Connect a capture or transfer point to an industrial system.
  • Granule conveying – Connect equipment in a pneumatic conveying line.
  • Abrasive particle extraction – Fit extraction systems subject to wear from the particles being conveyed.
  • Oil fume extraction – Carry captured fumes to an extraction system within the ducting’s temperature and chemical compatibility limits.

Industries and sectors

  • General industry
  • Wood and paper industries
  • Plastics processing
  • Quarrying
  • Construction and civil engineering

Electrical conductivity and use in ATEX zones

Carbon black incorporated into the wall gives the polyurethane permanent conductivity. The ducting has a resistivity below 106 Ω·m, measured in accordance with NF EN ISO 8031.

For use in an ATEX zone, check that the complete assembly, including the fittings and earthing arrangements, is suitable for the relevant zone and the risks identified for the installation.

Choosing the diameter, length and vacuum rating

Choose the inside diameter to suit the required flow and the spigot diameter. Then check the maximum vacuum rating and bend radius for the selected size. The vacuum ratings below apply to suction service.

  • Colour – Black.
  • Coil lengths in the range – 5 or 10 m depending on the diameter.
  • Temperature range – −40 to +90 °C.
  • Manufacture and traceability – Made in France, with the inside diameter and batch number marked on the ducting.
Wall thickness, maximum vacuum and bend radius by inside diameter
Inside diameter (mm) Wall thickness (mm) Maximum vacuum at 23 °C (mbar) Bend radius (mm)
40 0.6 300 40
51 0.7 300 51
60 0.7 250 60
70 0.7 200 70
76 0.7 200 76
80 0.7 150 80
90 0.7 150 90
102 0.7 150 102
110 0.7 150 110
120 0.7 100 120
127 0.7 100 127
140 0.7 100 140
152 0.7 100 152
160 0.7 100 160
180 0.8 100 180
203 0.8 50 203
225 0.8 50 225
254 0.8 50 254
300 0.8 50 305
350 0.8 50 350
400 0.8 20 400
500 0.8 10 500

Connecting Windflex® 806 M EL ducting

Secure the ducting to a suitable spigot using a semi-heavy-duty hose clamp or a T-bolt clamp. Before assembly, check that the spigot is free from burrs and sharp edges that could damage the inner wall.

Check the chemical compatibility of Windflex® 806 M EL ducting

When extracting oil fumes or conveying materials that may contain chemicals, use the hose chemical compatibility tool to check polyurethane resistance for the substance, its concentration and the operating temperature.

Read moreShow less
Product Details
071550

Data sheet

Hose's name
Gaine Windflex 806 M EL
Use
Suction & discharge (air, gas, dust and shavings)
Type of hose
Thin-walled and spiral-reinforced sheath
Application
Ducting
Conditioning
10 m pipe coil
Technical Sheet
https://www.axesspack.fr/media/fiches-techniques/gaine-windflex-806-m-el-en.pdf
Internal diameter
51 mm, 80 mm, 160 mm
Coil
10 m

Specific References

ean13
3506111746181
Online tools

Menu

Menu