×
Click for more products.
No products were found.
Click for more products.
No products were found.

BSP Bulkhead Fitting – Polypropylene – with Nut and Plug

Polypropylene BSP Bulkhead Fitting with Nut and Plug

Read moreShow less

Data sheet

Nominal diameter
1/2" to 2"
Material
PP
Adapter input
Male 1/2" BSP, Male 3/4" BSP, Male 1" BSP, Male 1"1/4 BSP, Male 1"1/2 BSP, Male 2" BSP
Thread
Male (BSP)
More information Express quote

Get your express quote for this product

Need a large quantity? Get a negotiated price on this combination within 24 hours. Free and no obligation.


Requested product :
BSP Bulkhead Fitting – Polypropylene – with Nut and Plug (id : 956)


€2.38 (tax excl.) / unit
(€2.86 TTC)

Minimum of order : 20 € (VAT ex.)

Free delivery in France from 250€ (VAT ex.)

Configure your product

Diameter

Order now and receive it...

Colissimo Points de retrait et bureaux de poste between Tuesday 24 November and Wednesday 25 November  with  Colissimo Points de retrait et bureaux de poste

Colissimo Expert (Domicile contre signature) between Tuesday 24 November and Wednesday 25 November  with  Colissimo Expert (Domicile contre signature)

Transporteur DPD, TNT ou DB Schenker between Tuesday 24 November and Wednesday 25 November  with  Transporteur DPD, TNT ou DB Schenker

Choose your reference

Refine your selection to display the available references.

Reference Diameter h (mm) h0 (mm) h1 (mm) F0 (mm) Perçage Ø mm * (min/max) Price Qty

Description

Polypropylene bulkhead fitting with male BSP thread, nut and plug

This range of polypropylene (PP) bulkhead fittings lets you create a connection through the wall of your container, such as an IBC, drum, tank or tub.

The nut holds the bulkhead fitting in place against the wall. The male BSP thread accepts a compatible female fitting, such as a barbed hose tail for connecting a hose. Use the supplied plug to close the outlet when it is not in use.

  • Body — Polypropylene (PP).
  • Male BSP thread — Six sizes available, from 1/2″ to 2″.
  • Included — Bulkhead fitting, retaining nut and plug.

Gasket not included

Order an EPDM flat gasket for bulkhead fittings separately if the material is suitable for the stored liquid. Check that the gasket dimensions match the sealing face of the fitting.

Applications of polypropylene BSP bulkhead fittings

  • Create a drain outlet — Add a drain point to an IBC, drum, tank or tub with a wall suitable for drilling.
  • Connect a transfer hose — Fit a compatible female BSP hose tail to the bulkhead fitting, then secure the hose over the tail.
  • Close the outlet when needed — Fit the supplied plug when the outlet is not in use, using a seal suitable for the connection.

Choosing the BSP thread size and hole diameter

In “Choose your reference”, select the male BSP thread size that matches the female fitting you intend to use. Then check the hole diameter range in millimetres for that part. Before drilling, click “Show technical drawing” to check the overall dimensions, the gasket seating area and the clearance needed to tighten the nut.

Hole diameters by part number

Part number Male BSP thread Hole diameter min.–max. (mm)
000093 1/2″ 20 to 30
000018 3/4″ 25 to 35
000017 1″ 32 to 42
000126 1 1/4″ 40 to 50
000058 1 1/2″ 47 to 55
000016 2″ 58 to 68

To identify the thread on an existing fitting, consult the BSP thread size guide.

Installing and sealing the bulkhead fitting

Gaskets are supplied separately. Before installation, choose an EPDM flat gasket for bulkhead fittings if EPDM is suitable for the liquid. Check the gasket’s inside diameter, outside diameter and thickness. Several gasket sizes may be available for the same nominal thread size.

  1. With the container empty, choose a flat area of the wall that you can reach from both sides. Drill to a diameter suitable for the selected part, then deburr the hole and clean the seating surfaces.
  2. Place the gasket between the flange of the bulkhead fitting and the wall. Insert the body through the hole, then tighten the retaining nut without deforming the wall.
  3. Fit the plug or a compatible female BSP fitting. Use a suitable sealing method for this connection, then check for leaks around the wall and at the outlet when putting the assembly into service.

Checking chemical compatibility and food-contact suitability

Use the chemical compatibility tool for materials to check that the bulkhead fitting and gasket are suitable for the liquid, its concentration and its temperature. If the assembly includes a hose, also consult the hose chemical compatibility tool.

If the container holds food, check the food-contact suitability of every component that comes into contact with it, including the bulkhead fitting, gasket and plug. If you connect a hose, use the hose food compatibility tool to choose a hose suitable for the food being transferred.

Completing your connection

  • Straight hose tails with a female BSP nut and gasket — Choose a thread that matches the bulkhead fitting and a tail that suits the inside diameter of the hose.
  • Hoses — Choose a hose suited to the liquid, operating conditions and hose tail dimensions.
  • Hose clamps — Choose a clamp that fits the outside diameter of the hose once it is fitted over the tail.
Read moreShow less
Product Details
000093

Data sheet

Nominal diameter
1/2" to 2"
Material
PP
Adapter input
Male 1/2" BSP, Male 3/4" BSP, Male 1" BSP, Male 1"1/4 BSP, Male 1"1/2 BSP, Male 2" BSP
Thread
Male (BSP)
Online tools

Customers who bought this product also bought:

Menu

Menu